9 10
1-800-798-7398 sharkclean.com
USING YOUR VACUUM
IN UPRIGHT MODE
WARNING: DO
NOT use to pick
up drywall dust,
fireplace ash, or
embers� DO NOT use
as an attachment to
power tools for dust
collection�
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green
The brushroll is on and
working as it should.
Solid Red
There is a jam in the brushroll
area. Turn your vacuum off
and remove the blockage.
Flashing Red*
The motorized floor nozzle
is overheating. Turn your
vacuum off and wait for it to
cool down. Next time you are
vacuuming that surface, try
opening the Suction Control.
No Light
The brushroll is off because the
vacuum is in Hard Floormode.
1 Plug power cord into outlet. Place foot on floor nozzle
andtilt handle back.
2 Choose the appropriate setting.
Hard Floor Cleaning
Set floor selector to Hard Floor and adjust
suction control as needed.
Thick Carpet & Area Rug Cleaning
Set floor selector to Carpet and adjust
suction control as needed.
Carpet Cleaning
Set floor selector to Carpet and adjust
suction control as needed.
NOTE: For deep cleaning per ASTM F 608 (embedded
dirt in carpets) please set to Carpet and Suction Control
to MAX.
3 Press power button to turn vacuum on to
start cleaning. Please note the brushroll will
not spin unless the wand is reclined.
STEP 1 STEP 2 STEP 3
* See Troubleshooting section for
further instructions.
Suction
Control
MAX MIN
To Next Page
Loading...
Need help?
General
