Shark Rotator NV680 - Checking for Blockages & Maintaining Brushroll

25 26
1-800-798-7398 sharkclean.com
CHECKING FOR BLOCKAGES
& MAINTAINING BRUSHROLL
1 Use a coin to unlock the 3 locks on the bottom of the
floornozzle.
MAINTENANCE
WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing�
TIP: You do not need any
tools to open the floor
nozzle—just a coin.
STEP 1
2 A portion of the base is
hinged for better access
to the brushroll and
exposure to the airway.
Shine a flashlight from
the bottom of the base to
check for blockages.
3 Remove any hair, fibers,
or debris that is wrapped
around the brushroll.
There is a groove
that allows a pair of
scissors to cut across to
loosendebris.
4 To reassemble, replace
base by lining it up along
the front of the nozzle.
Rotate closed and lock
the 3 locks.
STEP 2 STEP 3 STEP 4