5
UPRIGHT CLEANING
WARNING: To reduce the risk of electric shock, unplug the unit before assembling, adding or removing
attachments or converting modes.
WARNING: Always ensure the power is OFF before plugging and unplugging.
NOTE: DO NOT use to pick up drywall dust or fireplace ash.
STEP 1 STEP 2 STEP 3
1 Plug in power cord into electrical outlet and press
POWER button to turn vacuum on.
2 Hard Floor Cleaning
Set Floor Selector to Hard Floor and Suction Control
to Max for full suction or variable depending on user
preference.
Thick Carpet & Area Rugs Cleaning
Set Floor Selector to Carpet and Suction Control to
Min for reduced suction or variable depending on user
preference.
Carpet Cleaning
Set Floor Selector to Carpet and Suction Control to Max
for full suction or variable depending on user preference.
3 Place your left foot gently on the floor nozzle and tilt the
handle back to start cleaning. Note: The brushroll will
only spin once the vacuum is reclined back.
Suction Control
Floor Selector
MinMax
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
• Solid Green: The brushroll is on and working as it should.
• Solid Red: There is a jam in the brushroll area. Turn your vacuum off and remove the blockage.
• *Flashing Red: The motorised floor nozzle is overheating. Turn your vacuum off and wait for it to cool down.
*See Troubleshooting section for further instructions.
To Next Page
Loading...
Need help?
General
