12sharkcl ean.com
English
How to Attach/Detach:
• Use the lavender loop on the side of the bonnet to slide over the nozzle opening of the Garment Steamer. (fig. 15)
• Snap the bristle frame over the bonnet with the bristles placed at the top of the Garment Steamer bonnet.
• Attach the assembled Garment Steamer to the Handheld Steamer by snapping it into the main nozzle. (fig. 16)
• To remove, wait 2 to 3 minutes for the tool to cool, hold the release button and pull the tool away from the unit.
Usage:
• The Garment Steamer is ideal for removing wrinkles from clothing and for freshening and grooming upholstery.
• The bonnet and frame with bristles provides controlled steaming for fabrics and upholstery.
Cleaning Tips:
• Pressing the steam trigger in 3-to-5-second bursts, move slowly up and down over your garments or upholstery.
(fig. 17)
• Always determine color fastness of any fabric, especially with reds or blues:
– Take a clean, moist, warm towel and gently rub a small area on the fabric that is as out of sight and out of the
way as possible.
– If color bleeds onto the towel, you may need to have the piece professionally cleaned.
Using the Garment Steamer
fig. 15 fig. 17fig. 16
CAUTION: Make sure the Handheld Steamer is unplugged or in Standby mode while attaching or
removing the accessory. Avoid touching the accessory, as it will be very hot after steaming.
CAUTION: To avoid scalding injuries, always unplug and allow the Steam Mop to cool before removing or
changing accessories or pads.
For a full list of what is included with your Steam Mop, please refer to box's top panel.
To Next Page
Loading...
Need help?
General
