Sharp AL-1540CS

AL-1551CS DISASSEMBLY AND ASSEMBLY 8 - 19
B. Pickup solenoid
1) Remove two screws.
2) Remove the pickup solenoid
* When installing, hang iron core A on the solenoid arm.
C. Clutch
1) Remove the E-ring.
2) Remove the pulley and bush.
3) Slide the bush in the arrow direction.
4) Lift the clutch, and 5) remove the clutch.
1) Remove the E-ring.
2) Remove the parts.
D. Manual paper feed roller, pickup roller
1) Lift the paper stopper.
2) Slide the take-up roller unit.
3) Slide the bushing in the direction of the arrow.
4) Remove the take-up roller unit.
* When installing the take-up roller, hang the projection of the take-up
roller unit on the solenoid arm.
1) Remove the parts.
2) Remove the manual paper feed roller.
3) Remove the pickup roller.
4) Remove the parts.
Transport unit removal
1) Remove two screws.
2) Remove the document tray unit.
3) Remove five screws.
4) Remove the transport unit.
1
2
A
1
5
2
4
3
1
2
1
4
2
3
A
1
2
3
1
1
4
1
2
1
3
3
3
3
4