10
INSTALLING THE TD CARTRIDGE
1
Open the multi-bypass tray,
and then open the side
cover.
2
Push gently on both sides of the
front cover to open the cover.
3
Remove the TD cartridge from the bag. Remove the protective
paper. Hold the cartridge on both sides and shake it
horizontally four or five times. Hold the tab of the protective
cover and pull the tab to your side to remove the cover.
4
Gently insert the TD cartridge
until it locks in place while
pushing the lock release button.
4 or 5 times
Lock release button
To Next Page
Loading...
Need help?
General
