Sharp AL-2051 - Page 57

AL-2051 DISASSEMBLY AND ASSEMBLY 8 - 12
[Note for assembling the LSU]
When installing the LSU, turn the LSU clockwise and fix with
screws in order to provide an attachment backlash in the proper
direction.
Observe the following sequence of fixing screws.
25) Remove the screw, slide the left cabinet to the left to detach it.
Remove each pawl, and remove the paper exit tray.
26) Remove two screws and remove the fusing connector.
27) Remove five screws and the connector, and lift the intermediate
frame unit to remove.
28) Remove the screw and the E-ring, and remove the PS semi-cir-
cular earth plate and the PS roller unit.
29) Remove the E-ring and remove the spring clutch from the PS
roller unit.
5)
1)
2)
3)
4)
2)
2)
3)
4)
1)
5)
4)
4)
1)
2)
3)
PS roller unit
PS semi-circuler
earth plate
5)
4)
4)
1)
2)
3)
PS semi-circular
earth plate
Use grease of
Floil FG40H
only to apply to
this section.