Sharp AQUOS 4P-B65EJ2U User Manual

[ENGLISH]
Contents
Ver. 1.0.0
>>
<<
1.
Part Names
2.
Introduction
3.
Direct Button Operation
4.
On
-Screen Display Menu
1.
Introduction
2.
Menu Operation Buttons
3.
Video / Audio Settings
4.
Setup
5.
Parental Control
5.
Application
6.
Using a PC
7.
Appendix
8.
Specifications
9.
Trademarks
10.
Dimensional Drawings
Public Mode
How to enable “Public Mode”.
1. [MENU] -> [Setup] -> [Public Mode]
2. Enter the password (set "027" as default).
3. Open the "Public Mode" menu, set "Public Mode" to "On", each item is enabled.
Limit control function to the display for control function to the display by using "Public Mode" menu.
Setting item
Selected item
Value Description
Power On Fixed Off / On
“Power key” on main body will be set invalid.
The message “No power off by power button.” is displayed when power button is
pushed.
RC Button
Respond (default) Remote control is enabled.
No respond RC is set as invalid during power on mode.
Limited RC is set as invalid except “Power”, “Ch. up/down” and “Vol. up/down”.
Panel Button
Respond (default) Panel button is enabled.
No respond
Panel buttons are set as invalid during power on mode.
* Secret command (some key bind) is valid even though during this mode.
Menu button
Respond (default) Menu button is enabled as usual.
No respond Menu button is set as invalid during power on mode.
Maximum Volume 0 - 100 Set maximum volume in public mode.
Volume Fixed
Off (default) No limitation for volume setting.
On Volume setting and MUTE are set invalid by panel button, RC and command control.
AC CTRL Start-up at the level specified for a fixed volume at AC CTRL.
BOOT CTRL Start-up at the level specified for a fixed volume at start.
NOTE
• If "Power on Fixed" in "Public Mode" is set as "ON", "No input OFF" will be set "OFF" automatically.
en-US 29
Setup (Continue)
On-Screen Display Menu

Sharp AQUOS 4P-B65EJ2U Specifications

General

Screen shape	Flat
LED backlight	Yes
Response time	6 ms
Display diagonal	65 \
Display brightness	330 cd/m²
Display technology	LCD
Native aspect ratio	16:9
LED backlighting type	Direct-lit LED
Supported video modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p
Display number of colors	1.07 billion colors
Viewing angle, horizontal	176 °
Supported graphics resolutions	640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1920 x 1080 (HD 1080), 3860 x 2160
Display refresh rates supported	60 Hz
Motion interpolation technology	-
RMS rated power	16 W
Number of speakers	2
Headphone outputs	0
HDMI ports quantity	3
Common interface (CI)	No
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Power consumption (standby)	- W
Power consumption (typical)	180 W
Package type	Box
Package depth	151.89 mm
Package width	1588.01 mm
Package height	938.02 mm
Package weight	23000 g
Operating temperature (T-T)	0 - 40 °C
Tuner type	Analog & digital
Analog signal format system	NTSC
Digital signal format system	ATSC
Control type	Wireless
Stand type	Legs stand
Stand color	Black
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10)

Weight and Dimensions

Depth (with stand)	73.66 mm
Width (with stand)	1446 mm
Height (with stand)	835.66 mm
Weight (without stand)	16400 g