9
Part names – Main unit
Controls
NOTE
tes:Note:
• TV/VIDEO, CH(s)/(r), Volume (il/k) and MENU on the main unit have the same functions as the same buttons on the remote
control. Basically, this operation manual provides a description based on operation using the remote control.
Volume (il/k)
STANDBY/ON indicator
A green indicator lights when the power is
on and a red indicator lights when in the
standby mode (the indicator will not light
when the main power is off).
Remote control sensor window
Remote control sensor indicator
A red indicator blinks when the TV set
receives the remote control signal.
Upper control panel
CH (s)/(r)
MENU
TV/VIDEO
XX
XX
X (MAIN POWER)
OPC sensor window
OPC (Optical Picture Control) indicator
A green indicator lights when “Brightness” is
set to “auto”.
To change the vertical angle of the LCD
TV set, tilt the screen up to 5 degrees
forward or 10 degrees backward. The
TV set can also be rotated 25 degrees
to right and left. Please adjust the angle
so that the TV set can be watched most
comfortably.
Speaker
Headphone jack
How to adjust the angle
Hold the carrying handle and tilt
the screen while steadying the
stand with your other hand.
lc22ad1e_en_p01_12 04.2.2, 11:06 AM9
To Next Page
Loading...
