13
Turning the main power on and off
Switching the TV/VIDEO (TV/DTV/AV1/AV2/AV3) mode
Turn on the power of the connected video
equipment.
Press b to select the applicable input
source. The screen displays DTV, AV1, AV2,
AV3 or TV mode each time b is pressed.
STANDBY/ON
indicator
X (MAIN POWER)
1 S06
On-screen display
|
Press the
XX
XX
X (MAIN POWER) switch. The
STANDBY/ON indicator instantaneously
changes from red to green and the main unit
is turned on.
|
To turn off the main power, press the
XX
XX
X
(MAIN POWER) switch.
To turn off the LCD TV
Press B. The STANDBY/ON indicator will turn red.
To turn the LCD TV back on
Press B again. The STANDBY/ON indicator will turn green.
STANDBY/ON
Basic operation
2
1
NOTE
• About the video modes
TV: Select this when viewing analogue TV broadcasts.
DTV: Select this when viewing digital TV broadcasts.
AV1 and 2: Select this when viewing the signals
from the video equipment connected to
the AV-IN 1 and 2 terminals.
AV3: Select this when viewing the signals
from the video equipment connected to
the AV-IN 3 terminals using the VIDEO
or S-VIDEO terminal for video input.
• If both VIDEO and S-VIDEO terminals are connected
with cables, the S-VIDEO input terminal is selected as
the high priority.
Listening with headphones
■ Plug the headphone mini-plug into the headphone jack located on the front of the TV set.
NOTE
• Headphones are not included in the supplied accessories.
• Even if a headphone mini-plug is connected to the headphone jack, sound can be heard from the main unit speaker.
OK
Back
R
End
E
Headph. vol.
30
0
Please refer to page 36 to adjust the
sound volume.
Headphones
NOTE
• The On-screen indicator disappears after a few
seconds.
lc22ad1e_en_p13_20 04.2.2, 11:07 AM13
To Next Page
Loading...
