57
Teletext
How to use p (DISPLAY/INFO) button (for TV/DTV)
Analogue TV: Display the programme number and time.
Digital TV: Display the programme information.
You can display the time information included in the Teletext. Follow the steps
below to display the time.
Select a TV channel providing Teletext
information.
(The time information is automatically
captured.)
1
2
3
4
Press p. The channel display will appear on
the Display.
Press p again within the three-second interval
the channel display is on the screen.
Time information will display on the lower left of
the screen for about three seconds.
Even when you change the TV channel, you
can display the time information with steps 2 –
3 above.
NOTE
• The time is not captured when a selected channel has
no Teletext information.
NOTE
• The time display cannot be stored once the power is
turned off. When you turn on the power, perform steps
1 – 4 again.
NOTE
• If receiving a digital broadcast, you can only display the time by performing steps 2 and 3
below.
lc22ad1e_en_p53_59 04.2.2, 11:21 AM57
To Next Page
Loading...
