51
AV Connections (Continued)
[2] For programmes
• It is possible to select AV control voltage and the RGB signal for programme
positions 1 to 199.
• When connecting a video device to the AV1 terminal, you need to adjust the
decoder programme settings.
Perform steps 1 and 2 in
[1] AV1/AV2/AV3 to display the “AV
connections” screen.
Press a/b to select “For programmes”,
and then press OK.
Press a/b to select the “AV control
voltage” or “RGB select”.
Press c/d to select “yes” or “no”.
Press a/b to select “For decoder
connected to AV1”, and then press OK
to display the decoder programme
selection screen.
Press a/b/c/d to select the
programme for the decoder, and then
press OK. Repeat the same procedure if
you want to specify other decoder
programmes.
Press RETURN to return to the “For
programmes” screen.
Press a/b to select “Sound from AV1”,
and then press c/d to select the
desired sound source.
Press END to exit.
OK
Back
R
End
E
For programmes
AV control voltage [ no]
RGB select [
no
]
For decoder connected to AV1
Sound from AV1 [Dec.]
OK
Back
R
End
E
For programmes
AV control voltage [ no]
RGB select [
no
]
For decoder connected to AV1
Sound from AV1 [Dec.]
OK
Back
R
End
E
AV connections
AV1
AV2
AV3(Y/C)
AV3(CVBS)
For programmes
OK
Back
R
End
E
For programmes
AV control voltage [ no]
RGB select [
no
]
For decoder connected to AV1
Sound from AV1 [Dec.]
For decoder connected to AV1
OK
Back
R
End
E
0
1 E 02
2 E 04
3 U 02
4 U 04
5 E 05
6 E 08
7 E10
8
9
10
11
12
13
14
15
16
17
18
19
21
22
23
24
SHARP
ZDF
ARD
RTL
SAT1
Pro7
2
1
3
4
5
NOTE
• After one or both items are set to “yes”, and when AV
control voltage or RGB signal is input, the appropriate
image is received for all programme positions 1 to 199.
6
7
8
9
Useful features
lc22ad1e_en_p47_52 04.2.2, 11:19 AM51
To Next Page
Loading...
