Sharp Aquos LC-26D40U

Watching TV
Simple operations for watching a TV program
Perform the following steps before you press TV
POWER on the remote control unit.
1. Insert the batteries into the remote control unit. .
(See page 8.)
2. Connect the antenna cable to the TV. (See page
13.)
3. Plug in the AC cord to the AC outlet. (See page 7.)
POWER
- VOL + v CH A INPUT
o:::D o:::D 0
Press POWER on the TV, or TV POWER on the
remote control.
• POWER indicator (Green): The TV is on. ("PLEASE
WAIT" will appear for a few seconds on the screen.)
POWER indicator
• The LANGUAGE setup menu will appear automatically
when MENU is pressed for the first time. (See below.)
TV status indicator (POWER)
ON
OFF/Standby
Lighting (Green)
Lighting (Red)
Press POWER on the TV, or TV POWER on the
remote control.
• The TV enters standby mode and the image on the
screen disappears.
• The POWER indicator on the
TV changes to Red.
I!I :ADJUST
I!I :SELECT
CLOCK SET ~
AIR/CABLE CABLE
AUTO CH MEMORY ~
ADD/DELETE ~
,
Press ~/~ to select the desired language
from the list.
• If you are not going to use this TV for a long period of
time, be sure to remove the AC cord from the power
outlet.
• Weak electric power is still consumed even when
POWER is turned off.
• If a station being viewed stops broadcasting, the
TV will
automatically shut itself off after 15 minutes.
Language setting
When you press MENU for the first time, the
LANGUAGE setup menu will appear
automatically.
Select from among 3 languages: English, French and
Spanish.
TV VCR
AUDIO
0 0
0
CBLlSAT DVD
FUNCTION
0 0
0
SOURCE
LIGHT
(3
8
CID
(3
CB
8
REC
CD
m
m
(3 (8
@ID
MODE
@
EXIT ~ RETURN
O~O
FREEZE MENU
O~.
TV POWER (On/Standby)
@-14