Sharp Aquos LC-26D40U

Using external equipment
You can use the INPUTS or 6 terminal when connecting HDMI equipment.
When using an HDMI-DVI
conversion cable, use INPUT5
.-.======:::::::::::::::::===~==..I'" and AUDIO terminal.
[]]
~
e=J HOMI equipment
I!I :ADJUST
I!I :SELECT
,
AUDIO
A
WOW SRS 3D OFF
FOCUS OFF
TruBass OFF
:uiill ;Po/- iii
Press ~/~ to select. (AUDIO).
Press MENU and the MENU screen
displays.
Press
~/~ to select "HDMI" or "DVI".
Press £./.." to select "HDMI".
HOMI: When you connect the HDMI device to
the TV, select this setting.
OVI: When you connect the DVI device to
the TV with analog audio cords, select
this setting.
[O-6]:SELECT
6. INPUT6
SOURCE SELECTION
O. TV
1. INPUT1
2. INPUT2
3. INPUT3
4. INPUT4
To watch an HDMI equipment image, select
"INPUTS" or "INPUT6" from "SOURCE
SELECTION" menu using INPUT on the
remote control unit
or on the TV. (See page
23.)
• Refer to your external equipment operation manual for
the signal type.
Press EXIT to return to the normal screen.
@-25