Appendix
Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.
• Do
not
remove
the
stand
from
the
TV
unless
using
an
optional
wall
mount
bracket
to
mount
it.
Before
attaching/detaching
stand
• Before performing work make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
1
Soft cushion
2
Unfasten the four screws used to secure the stand
in
place.
Detach the stand from the TV.
(Hold the stand so it will not drop from the edge
of
the
base area.)
• To attach the stand, perform the above steps
in
reverse order.
•
Installing
the
TV requires special
skill
that
should
only
be
performed
by
qualified
service
personnel.
Customers
should
not
attempt
to
do
the
work
themselves. SHARP bears
no
responsibility
for
improper
mounting
or
mounting
that
results
in
accident
or
injury.
Using an
optional
bracket
to
mount
the
TV
• You can ask a qualified service professional about using
an
optional AN-26AG1 bracket for LC-26D4QU or AN-
37AG2 bracket for LC-32D4QU to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging
on
the
wall
Wall mount bracket. (See the bracket instructions for details.)
About
setting
the
TV angle
Vertical mounting
Angular mounting
LC-26D40U
Up
to 20°
LC-32D40U Up to 10°
• Detach the cable clamp
on
the rear of the TV when using the optional mount bracket.
(00-41
To Next Page
Loading...
