Sharp Aquos LC-26D40U

Useful adjustment settings
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Let you set the input terminal displayed when using
the "SOURCE SELECTION" menu or channel display.
Resetting picture adjustments
Each picture adjustments return to the following
factory settings:
AV MODE STANDARD
BRIGHTNESS / COLOR / SHARPNESS center (25)
CONTRAST (40)
TINT center (0)
COLOR TEMPERATURE MEDIUM
INPUT FLASHBACK
00
VOL CH
SURROUND j+) AMUTE
oUUO
FREEZE MENU
o e
Press MENU and the MENU screen
displays.
Press
~/~ to select
(PICTURE).
1!1 :SELECT l!l :ADJUST
Press EXIT to return to the normal screen.
2.INPUT2
3.INPUT3
4.INPUT4
5. INPUTS
6.INPUT6
Press ~/~ to select the new label for the
selected input source.
Press MENU and the MENU screen
displays.
-
Uses the default label name
VCR
Video cassette recorder
DVD
DVD video
DTV
Digital TV set-top box
SAT
Satellite box
CBl
Cable box
HD
HDMI equipment
Press ~/~ to select fJ!i, (OPTION).
Press
./T to select "VIDEO LABEL", and
then press
~/~.
The VIDEO LABEL menu screen displays.
Press ./T to select the specific input
source which you want to change.
'"
>
A
COLOR
TEMPERATURE MEDIUM
A
AUDIO LANGUAGE ~
DIGITAL OUTPUT PCM
.. ~*.;.-
Press ./T to select "RESET", and then
press
~/~.
The TV screen return to the normal screen,
and "RESET" will be displayed a few
seconds.
Press
./T to select "RESET", and then
press ~/~.
Resetting audio adjustments
Each audio adjustments return to the following factory
settings:
BASS center (25) BALANCE center (0)
TREBLE center (25)
Press MENU and the MENU screen
displays.
Press ~/~ to select. (AUDIO).
The TV screen return
to the normal screen,
and "RESET" will be displayed a few seconds.
• The channel setup settings will not be changed.
• The language settings will not
be changed.
® - 26. The password number setting will not be changed.
• You cannot change label for "TV" input.