Sharp Aquos LC-26D40U

Basic adjustment settings
This function allows you to program 4 favorite
channels. By setting the favorite channels
in advance,
you can select your favorite channels easily.
To create channel labels
Select a channel you want to label.
Programming favorite channel
Select the channel you want to register as a
favorite channel.
Press FAVORITE and the FAVORITE CH
menu screen displays.
Press MENU, then press
~/~ to select fll,
(OPTION).
Press
.. /T to select "CH LABEL", then press
~/~. The CH LABEL menu will appear.
Press .. /T to select "SET/CLEAR". Press
~/~ to select "SET" then press ENTER.
:CH 12
RETURN
CH LABEL
SET
Press EXIT to return to the normal screen.
I!I :SELECT I!I :ADJUST
ENTER: SET
Repeat steps 1-5 for other channels. You
can assign a label to each channel.
The characters rotation as follows:
r-~O···9~A···Z~
~+~SPACE~
If the character which you desire appears, press
ENTER. Repeat this step to enter the rest
of the
characters.
When you finish inputting the label name, press
ENTER.
Press ~/~ to enter a character in the first
space. Press the button repeatedly until the
character you want appears on the screen.
I!~ SELECT ENTER: SET
11- FAVORITE CH -
You can jump to the registered favorite
channels directly using four FAVORITE CH.
Press ~/~ to select the position, and then
press ENTER to register.
Press ~/~ to select "SET", and then press
ENTER.
Press EXIT to return to the normal screen.
• You can enterto the same menu screen from __, (OPTION)
menu.
Deleting a favorite channel
Repeat steps 1 to 2 in above procedure.
Press ~/~ to select "CLEAR", and then
press ENTER.
Press ~/~ to select the registered favorite
channel you want to release, and then press
ENTER.
Press EXIT to return to the normal screen.
To erase channel labels
Select a channel with a label which you
want to remove.
Press MENU, then press
~/~ to select #11'
(OPTION).
Press
.. /T to select "CH LABEL", then
press ~/~ to display the CH LABEL menu.
Press .. /T to select "SET/CLEAR". Press
~/~ to select "CLEAR", then press ENTER.
Press EXIT to return to the normal screen.
Repeat steps 1-4 to erase other channel
labels.
@-20