14
Preparation
Using Digital Audio Output
It is possible to output audio through the
DIGITAL
AUDIO OUTPUT
terminal. PCM or Dolby Digital audio
outputs from the terminal.
To optical digital input of external audio devices
Optical
fi bre cable
(commercially
available)
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the
same audio from the speakers. (The audio of the content
you are viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output
some signals, depending on devices and software.
Connecting a Digital TV STB (Set Top Box)
You can use the INPUT4 (ARC)/INPUT5/INPUT6/INPUT7 (HDMI) or the INPUT1 (component)/INPUT2 (composite)
terminals when connecting to a Digital TV STB (Set Top Box), and other audiovisual equipment.
NOTE
• When using a DVI-HDMI adaptor or conversion cable, input the Audio Signal from the AUDIO terminal of AUDIO IN. (See page
50.)
When using HDMI cable
(commercially available)
When using component cable
(commercially available)
STB (Set Top Box)
STB
(Set Top
Box)
Connecting a PC
You can use the INPUT3 (PC) terminal when connecting to a
PC. (See page 54.)
PC
R – AUDIO – L
YP
B
(CB)
P
R
(CR)
ANALOGUE
RGB
AUDIO
(L/R)
40LE820X_en_au.indd 1440LE820X_en_au.indd 14 2010/06/18 16:11:172010/06/18 16:11:17
To Next Page
Loading...
