Sharp Aquos LC-40LE820X - Channel Selecting Effect; LED Illumination

53
Settings when using external devices
Channel selecting effect
This function sets a screen effect when choosing or
changing channels.
Press
b/c/d
to select “Option”.
Press MENU and the MENU screen displays.
1
3
Press
c
/
d
to select “Yes”.
Press
a
/
b
to select “Channel selecting
effect”.
5
6
2
Press c/d to select “Setup”.
4
Press
a
/
b
to select “Screen effect” and then
press ENTER.
LED Illumination
This function makes the LED on the front of TV
illuminated in several ways.
Press
b
/
c
/
d
to select “Option”.
Press MENU and the MENU screen displays.
1
3
Press
a
/
b
to select the desired item, and
then press ENTER.
• After you select “Off” or “Standby”, press
c
/
d
to
select “Yes” and then press ENTER.
5
2
Press
c
/
d
to select “Setup”.
4
Press
a
/
b
to select “Illumination”, and then
press ENTER.
Selected items Description
Off The LED is not illuminated.
Standby The LED is illuminated while the TV is
in standby mode.
Watch The LED is illuminated while you
watch TV.
Always The LED is illuminated all the time.
NOTE
• The factory default for this item is “Watch”. Set to “Off” if
you do not want the LED to illuminate.
40LE820X_en_au.indd 5340LE820X_en_au.indd 53 2010/06/18 16:12:432010/06/18 16:12:43