Appendix
NOTE
• To attach the stand, perform the above steps in reverse
order.
• As the TV is very heavy, be careful when moving it.
Mounting the TV on the wall
Removing the stand
For wall mounting with the optional bracket (AN-37AG2+AN-37P30 or AN-52AG4) remove the stand.
Before setting TV on the wall.
• Remove the connected cables (DVD, VCR, etc) from the terminals.
• Detach the four caps at the 4 locations on the rear of the TV.
73
1
2
2
1
3
1
Unfasten the 4 screws used to secure the stand
in place.
2
Detach the stand from the TV. (Hold the stand so
it will not drop from the edge of the base area.)
Remove the screws at the 4 locations on the rear of
the TV.
Loosen the screw used to secure the stand cover
and remove the cover.
4
2
1
1
Pinch the portion at
1
.
2
Pull out the portion at
2
.
40LE820X_en_au.indd 7340LE820X_en_au.indd 73 2010/06/18 16:13:072010/06/18 16:13:07
To Next Page
Loading...
