Sharp Aquos LC-40LE820X - Menu Language Settings; Switching Subtitle Languages; Digital Audio Language; Watching TV (Continued)

NOTE
• This function depends on audio language information from
broadcasters.
• If audio for the selected language is not included in a
received broadcast, audio will not be output for that
language.
NOTE
• If subtitles for the selected language are not included in
a received broadcast, subtitles will not be shown for that
language.
26
Menu language settings
You can also select a language from setup menu.
Select from among 3 languages: English, Simplifi ed
Chinese and Arabic.
Press MENU and the MENU screen displays.
1
Press
c/d
to select “Setup”.
2
Press
a
/
b
to select “Language”, and then
press ENTER.
4
Press
a
/
b
to select the desired language
listed on the screen, and then press ENTER.
5
Press
b/c/d
to select “View setting”.
3
Watching TV
2
Press MENU and the MENU screen displays.
Press
c/d
to select “Setup”.
6
Press
a
/
b
to select “Subtitle”, and then press
ENTER.
Press
a
/
b
to select “1st language” or “2nd
language”, and then press ENTER.
1
5
7
Press
a
/
b
to select the desired language,
and then press ENTER.
Set “For hearing impaired” to “Yes”
(For hearing impaired) 1st Language
2nd Language
Off
••••••••
Set “For hearing impaired” to “No”
1st Language 2nd Language
(For hearing impaired)
Off
••••
H Selecting the Language
Switching subtitle languages
Each time you press
[
on the remote control, the
subtitle switches when the broadcast contains subtitle
information.
2
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
6
Press
a
/
b
to select “Subtitle”, and then press
ENTER.
Press
a
/
b
to select “For hearing impaired”.
1
5
7
Press
c
/
d
to select “Yes”.
H Displaying subtitles for the hearing
impaired
You can display subtitles for the hearing impaired in
the broadcast.
4
Press
b/c/d
to select “View setting”
.
Press
a
/
b
to select “Individual setting” and
then press ENTER.
3
4
Press
b/c/d
to select “View setting”.
Press
a
/
b
to select “Individual setting” and
then press ENTER.
3
Digital audio language
Set up to three preferred multi audio languages to
display if the audio languages are available.
2
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press
a
/
b
to select “Digital audio language”,
and then press ENTER.
1
5
4
Press
b/c/d
to select “View setting”.
Press
a
/
b
to select “Individual setting”, and
then press ENTER.
3
6
Press
a
/
b
to select “1st Language”,“2nd
Language” or “3rd Language”, and then press
ENTER.
7
Press
a
/
b
to select the desired language,
and then press ENTER.
Set up two preferred subtitle languages to display if the
subtitle languages are available.
40LE820X_en_au.indd 2640LE820X_en_au.indd 26 2010/06/18 16:11:412010/06/18 16:11:41