Sharp Aquos LC-40LE820X - Setting Channels to Your Preference; Digital Settings

Manual search
Additional search
Manual adjust
Yes No
21
Setting channels to your preference
You can run the auto search procedure again at any
time by accessing the “Setup” menu and “Programme
setup”. Channels can be tuned automatically or
manually.
Watching TV
Digital settings
You can reconfi gure DTV services settings
automatically or manually.
Press
a
/
b
to select the desired service.
Press the colour button on the remote control
corresponding with the item you want to
reconfi gure.
• The
✔
mark indicates the operation is set to on.
Each time the colour button is pressed, you can
switch the corresponding operation on/off.
1
2
H Additional search
Use this menu to add new services automatically after
auto installation has been completed.
H Manual search
Add new services within a specifi ed frequency band.
• Enter the frequency using 0 - 9 numeric buttons.
H Manual adjust
Confi gure various settings for each service using the
Colour (R, G, Y, B) buttons.
Press MENU and the MENU screen displays.
Press
c/d
to select “Setup”.
Press
c
/
d
to select “Yes”, and then press
ENTER.
1
2
7
Press
a
/
b
to select the desired menu item,
and then press ENTER.
6
Buttons for Manual Adjust operation
Menu items
Remote
control
buttons
Description
Lock R When the service is
locked, you must enter
your password whenever
you tune to the service.
CH Skip G Services with a
✓
mark
are passed over when
pressing
r
/
s
in the
TV/remote control unit.
Delete Y The service is deleted
from the list. Execute
one of “Auto installation”,
“Additional search” or
“Manual search” to watch
the deleted service again.
Sort B The item position of
services can be sorted.
The item position of services can be sorted
1
Press
a
/
b
to select the service whose item
position you want to move, and then press B.
DTV 994  

SIT 2
DTV 995 SIT 1
2
Press
a
/
b
to move it to the desired position, and
then press ENTER.
DTV 994

SIT 1
DTV 995 SIT 2
3
Repeat steps
1
and
2
until all desired service
items are sorted.
Press
a
/
b
to select “Programme setup”, and
then press ENTER. If you have already set the
password, enter it here.
• See page 28 for setting a password.
The “Digital setting” screen displays and then
press ENTER.
5
Press
b/c/d
to select “View setting”.
3
Press
a
/
b
to select “Channel settings” and
then press ENTER.
4
40LE820X_en_au.indd 2140LE820X_en_au.indd 21 2010/06/18 16:11:292010/06/18 16:11:29