14
Preparation
Connecting a STB (Satellite, Cable, etc.)
You can use the INPUT 1/INPUT 2 or INPUT 4/INPUT 5/INPUT 6 (HDMI) terminal when connecting to a STB
(Satellite, Cable, etc.) and other audiovisual equipment.
NOTE
• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 6. (See page 47.)
When using HDMI cable
(commercially available)
When using component cable
(commercially available)
R – AUDIO – L
YPB
(CB)
P
R
(CR)
STB
(Set Top Box)
STB (Set Top Box)
Connecting a PC
You can use the INPUT 7 (PC) terminal when connecting to a PC.
ANALOGUE
RGB
AUDIO
(R/L)
PC
52D85X_en_b.indd 1452D85X_en_b.indd 14 9/3/08 8:26:07 AM9/3/08 8:26:07 AM
To Next Page
Loading...
