INPUT4(HDMI)
INPUT5(HDMI)
INPUT6(HDMI)
INPUT7(RGB)
Y es
No
Skip input selection of HDMI
50
Settings when using external devices
You can assign each input source a label as you
prefer.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
DVD
INPUT7
Repeat until the name is fully spelt out.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, select “END”, then press
ENTER to exit from the labelling menu.
(Example)
NOTE
• You cannot change labels if the input source is TV.
6
Press TV/VIDEO to select the desired input
source.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “Input Label”, and then
press ENTER.
4
Press
a
/
b
/
c
/
d
to select each character of
the new name for the input source, and press
ENTER.
5
(Example)
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Press
a
/
b
to select “Colour System”, and
then press ENTER.
3
Press
a
/
b
to select a compatible video signal
system of your equipment, and then press
ENTER.
4
Auto
PAL
SECAM
Colour system settings
You can change the colour system to one that is
compatible with the image on the screen.
NOTE
• Factory preset value is “Auto”.
• If “Auto” is selected, colour system for input signal is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
This setting allows you to skip the HDMI or RGB input
on the “Input Select” menu.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press a/b to select “Input Skip”, and then
press ENTER.
3
Press
a
/
b
to select the Input (INPUT4 to
INPUT7) you wish to skip, and then press
ENTER.
4
Press
c
/
d
to select “Yes”, and then press
ENTER.
5
Press MENU to exit.
6
Labelling input sources Skipping HDMI/RGB input
Colour system settings
A
K
0
U
B
L
1
V
C
M
2
W
D
N
3
X
E
O
4
Y
F
P
5
Z
G
Q
6
+
H
R
7
-
I
S
8
.
J
T
9
_
CLEAR
BACK
END
External equipment name settings
52D85X_en_f.indd 5052D85X_en_f.indd 50 9/3/08 11:46:30 AM9/3/08 11:46:30 AM
To Next Page
Loading...
