Connectingto E×ternalEquipment
Refertopage54foralistofPCsignalscompatiblewiththeTV.
WhenusingHDMI cable (HDMI 1 2, 3 or 4):
HDMI-certified cable
1
Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable
to the HDMI 1 terminal, connect a © 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to
"HDMl+Analog". (See page 54.)
• The HDMI terminals only support digital signal.
m When using DVI-HDMi conversion cable (HDMI 1):
V,- ,conve sionc ,e
® 3.5 mm stereo minijack cable r ,_l_,_j
When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the HDMI 1 tern_inal, connect a G 3.5 mm stereo minijack cable to the AUDIO IN
terminal and set "Audio Select" to "HDMl+Analog". (See page 54.)
m When using analog RGB cable (PC IN}:
Analog RGB cable
(D-sub 15-pin cable or VGA cable)
® 3.5 mm stereo minijackcable
When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of PC IN.
When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 54.)
@-16
To Next Page
Loading...
