Using AQUOS LiNK
You can manually turn on/off the power of the
connected AQUOS LINK-compatible equipment.
Each time you press ENTER, the connected
equipment switches on or off.
You can use the device operation panel to control
playback operations.
Press A/T/4/_ to select the desired operation.
o This function works only when AQUOS LINK-compatible
equipment with the Device Operation Panel function is
connected.
This function allows you to display the title list for the
connected equipment and to play back the title you
want to enjoy.
Before using this function
Power on the AQUOS LINK-compatible equipment,
and select the appropriate external input.
Select the title with A/V/4/_, and then press _ to
start playback.
o This function works only when AQUOS LINK-compatible
equipment is connected.
You can call up the AQUOS LINK-compatible
recorder's EPG and preset timer recordings using the
TV's remote control.
Select the program on the recorder's EPG.
= You can use A/T/4/_, ENTER, RETURN, EXiT and the
colored buttons.
o This function works only when an AQUOS LINK-compatible
recorder is connected.
o Refer to the operation manual of the recorder for details.
You can select to listen to the TV sound only from the
AQUOS LINK-compatible audio system.
By AQUOS audio SP: The sound from the TV speaker is
muted and only the sound from the AQUOS LINK-
compatible audio system is audible.
,, You can use VOL+/= and MUTE.
By AQUOS SP: The sound is output from the TV
speaker.
You can manually change the AQUOS AUDIO speaker
system's sound mode.
The sound mode changes each time you press
ENTER.
o Referto the operation manualof the AQUOSLINK-
compatibleaudiosystem for details.
You can call up a setup menu from the connected
AQUOS LINK-compatible equipment.
= Depending on the status of the equipment (recording or in
standby mode, etc), the setup menu will not be displayed.
o The setup menu will not be displayed with the player BD-
HP20U currently available.
You can switch the media (HDD or DVD) for playback
or recording on the AQUOS LINK-compatible recorder.
= The Mediatype toggles each time you press ENTER in
"ChangeMediaof Device".
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
Press A/V to select the desired device from a list of
connected HDMI devices, and then press ENTER.
You can also display the AQUOS Link Setup screen
from the LINK Operation Menu.
Q- 52
To Next Page
Loading...
