On=Screen Display Menu
_ 0 ," O| O I ,,
Power control setting allows 'ou to save energy.
Example MIllE [_ ,_T
Smart
AAL Central
N
1 Press MENU to display the MENU screen, and then
press 41/1_ to select "Power Control".
2 Press A/V to select a specific adjustment item,
and then press ENTER.
3 Press A/T (or 4t/1_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
• Skip this step for "Audio Only".
This function allows you to set the Power Saving level
in order to decrease the power consumption and
increase the backlight lifespan.
Standard: Optimizes power reduction based upon video
content. When set to "Standard", ,,_/,, appears on the
screen.
Advanced: Optimizes power reduction based upon video
content and engages OPC. When set to "Advanced",
"_" appears on the screen.
Off: This function does not work.
= "Power Saving" does not function when you set AV MODE
to "AUTO" or "DYNAMIC (Fixed)".
= You cannot select a different Power Saving item for each
AV MODE.
When "Power Saving" is set, the "OPC" settings for all AV
Modes will automatically change.
--If you set "OPC" to "On" when "Power Saving" is set to
"Standard", then the "Power Saving" setting will change
to "Advanced".
--When you change the "Power Saving" setting from
"Advanced" to "Off" or to "Standard", "OPC" will be set
to "Off".
--"AUTO" and "DYNAMIC (Fixed)" will remain set to "Off".
= When "Power Saving" is set to "Standard" or "Advanced",
the Power Saving leaf icon appears to the left of "OPC" in
the Picture Settings menu screen.
When listening to music from a music program, you
can turn the screen off and enjoy audio only.
On: Audio is output without screen image.
Off: Both screen imagesand audio are output.
= The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE)
is pressed.
This function allows the TV to automatically shut the
power down when there is no signal received.
Enable: The power will automatically shut down if there is
no signal for 15 minutes.
Disable: This function does not work.
A confirmation screen appears.
Yes: The setting will be changed.
No: The setting will not be changed.
= When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
= When a TV program finishes, this function may not operate.
This function allows the TV to automatically shut the
power down when there is no operation.
Enable: The power will automatically shut down if there is
no operation for 3 hours.
Disable: This function does not work.
A confirmation screen appears.
Yes: The setting will be changed.
No: The setting will not be changed.
= When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
Q- 29
To Next Page
Loading...
