11
Preparation
Remote control unit
1 (POWER (Standby/On))
To switch the power on and off. (See page 17.)
2
(HOME)
Display the smart home.
3 SLIDE BAR
Touch the slide bar to switch between TV interface
and App interface.
4 (Cursor)
Select a desired item on the setting screen.
5 OK
Execute a command.
6 VOL
Set the volume.
7 INDICATOR
The indicator of the remote control.
8
(MENU)
Display the menu list.
9
(RETURN)
Return to the previous menu screen.
10 CH
TV input mode: Select the channel.
11
(BROWSER)
Start browser.
8
7
9
• When the remote control is in sleep mode, please press
any keys (except the power key) to wake up the remote
control.
The indicator of the remote control
Indicator Performance
Instructions
state
Description
Blue
Rapid flash Remind Start the pairing.
For 3 seconds Remind Pairing is OK.
Red
Slow flash for 3
seconds
Warning Low battery ,the remote control can still be used.
Rapid flash for 3
seconds
Warning Serious low-battery,the remote control cannot be used.
For 3 seconds Warning Pairing timeout. Pairing is failed.
Blue,Red Alternately flash Remind Remove current pairing, the new remote control can pair to the TV at this time.
+
/
-
/ //
/
To Next Page
Loading...
