21
Watching TV
DNR
Reduce noise on screen and produces a clearer video.
You can select "Auto", "High", "Low", or "Off".
Active contrast
Fine Motion
Intelligent variable contrast
HDR Gamma setting
Automatically adjust the contrast of an image
according to the scene.
Using the
motion function can view the high speed
motion image more clearly.
You can select "Advanced", "Standard"
,
or "Off".
The function divides the backlight into different
segments according to picture brightness. It constantly
analyzes and adjusts the brightness of the input signal
to optimize the picture brightness which brings brilliant
and colourful image. You can select "High", "M-high",
"Middle", "Low" or "Off".
You can adjust the HDR image signal input. The value
is bigger, pay attention to the brightness. The value is
smaller, pay attention to the contrast.
Reset
Reset all picture adjustment items to the factory preset.
• Only applicable for 24/30Hz input signal.
Selected item Description
High
M-High
Middle
Low
It displays brightness with 4 levels (High,
M-High, Middle, Low) through fine image
control and backlight control.
Off No adjustment.
Auto volume
Bass/Treble/Balance
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The automatic volume control
(Auto volume) reduces this problem by equalizing
levels.
You can adjust the audio of the selected AV mode.
Audio
AV mode
Please see page 20.
Set the audio as you desired .
Selected item
button
button
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio
from the right
speaker
Decrease audio
from the left speaker
NOTE
• They cannot be changed during “DYNAMIC (Fixed)” mode.
• Analog channel audio and video input audio are output in
PCM mode even when "RAW" is selected.
• PCM digital input signals are output in PCM mode even
when "RAW" is selected.
Surround sound
Digital audio output
The surround sound function produces a surround
effect from the speakers.
This function allows you to select your favourite audio
output system.
Item Description
PCM16 The optical output format is normally in
PCM.
RAW Dolby Digital or DTS is output when the
Dolby Digital or DTS audio formats are
received.
Reset
Reset all audio adjustment items to the factory preset
values.
To Next Page
Loading...
