20
Watching TV
Selected item Description
STANDARD For a highly defined image in a normally
bright room
.
MOVIE For viewing the movies.
GAME Lowers image brightness for easier
viewing.
USER Allows the user to customise settings as
desired. You can set the mode for each
input source.
DYNAMIC For a clear-cut image emphasising high
contrast for sports viewing.
DYNAMIC
(Fixed)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
Selected item
button
button
Contrast For less contrast. For more contrast.
Brightness For less brightness.
For more brightness.
Tint Skin tones become
reddish.
Skin tones become
greenish.
Sharpness For less sharpness.
For more sharpness.
Colour For less colour
intensity.
For more colour
intensity.
Backlight The screen dims.
The screen brightens.
Gamma
setting
For less middle
brightness.
For more middle
brightness.
Video
AV mode
Colour temp (Colour temperature)
Wide mode
Contrast/Brightness/Tint/Sharpness/
Colour/Backlight/Gamma setting
The “AV mode” function enables you to select
appropriate settings for audio and video to account for
the system environment.
Adjusts the colour temperature to give the best white
image.
You can select "High", "M-high", "Middle", "M-low", or
"Low".
You can select different picture sizes that account for
the kind of each picture.
You can adjust the picture to your preference.
Set the video as you desired .
Selected item Description
Normal For 4:3 standard pictures. A side bar appears
on each side.
Zoom 14:9 For 14:9 letterbox pictures. A thin side bar
appears on each side, and you may also
see bars on the top and bottom with some
programmes.
Panorama In this mode the picture is progressively
stretched toward each side of the screen.
Full For 16:9 squeeze pictures.
Cinema 16:9 For 16:9 letterbox pictures. Bars may appear
on the top and bottom with some programmes.
Cinema 14:9 For 14:9 letterbox pictures. Bars may appear
on the top and bottom with some programmes.
Dot by Dot Display an image with the same number of
pixels on the screen (only when receiving 2160p
signal).
Underscan Display with an underscan image only when
receiving a 720p / 1080i / 1080p signal.
Display with the High-Definition image adjusted
optimally. Noise may appear on the edge of the
screen with some programmes.
• You can select a different “AV mode” item for each input
mode.
Normal Zoom 14:9
Panorama
Cinema 14:9 Cinema 16:9 Full
NOTE
• Some picture sizes may not be displayable depending on
the input signal.
• “Zoom 14:9” and “Cinema 14:9” are only available for the
DTV or ATV mode.
Sleep timer
Auto power-off at a designated time.
You can choose from “Off”, “30min.”, “60min.”,
“90min.”, “120min.” or “150min.”.
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
Starting sound
You can change the starting sound setting.
Select from “On”or “Off”.
Illumination
You can change the illumination setting.
Select from “On”or “Off”.
To Next Page
Loading...
