22
Watching TV
Channel
Auto search
Digital setting
Analogue setting
You can run auto installation again, even after setting
up the preset channels.
You can set some DTV channel items manually.
You can set some ATV channel items manually.
Set the channel as you desired .
Auto search
Auto search
Manual search
Signal info
Use this menu to add new DTV services automatically
after auto installation has been completed.
Use this menu to add new ATV services automatically
after auto installation has been completed.
Add new services within a specified frequency band.
Show the “Channel No.”, “Freq”, “Signal strength” and
“Signal quality” of the current program.
NOTE
• The values of “Signal strength” and “Signal quality” indicate
when to check the appropriate alignment of the antenna.
NOTE
• Auto search can only search channels from the current
mode.
You can set the channel manually.
Manual search
Program edit
Please see page 19.
Item Description
Storage to
[1~99]
Save programme to your desired
channel number. Press OK to save.
Current CH Select the channel you want to edit.
Colour system Select the optimum colour system to
receive. (PAL, SECAM, NTSC)
Sound system Select the optimum sound system
(Broadcasting system) to receive. (BG,
DK, I, MN)
Search Start searching from current channel.
You can search the next channel by
pressing to adjust the frequency .
Fine-Tune Tune the frequency of the stored channel
to your desired position.
Network
Apps
Please see pages 24 to 25.
Please see page 26.
/
To Next Page
Loading...
