SW
No.
Bit
No.
ITEM Soft SW setting and function Factory Setting
27 6 Reserved 0
7 Telephone line kind Used to select the kind of telephone line (tone or pulse). Tone
8 Reserved
28 1
2
3
4
A.M. mode
Silent detection time
Used to set the silent detection time in the answering and
recording mode.
The set range is OFF and 1 to 10sec.
Time = 8 × Bit1 + 4 × Bit2 + 2 × Bit3 + 1 × Bit4 sec
Effective : 0(= OFF), 1 –10
0
1
0
1
5 A.M. mode auto reception select Used to set whether FAX reception is started or not after 6
call rings if the answering function does not work for some
reasons in the answering and recording mode.
0
6 Annoying FAX prevention function Used to set ON/OFF of the annoying FAX prevention
function.
0
7 Polling function Used to set whether one-touch key “20” is used as the
polling key or not.
0
8 Reserved 0
29 1
2
Record paper size (Main Tray) Used to set the record paper size in the main tray. 0
0
3 Reserved 0
4
5
Record paper size (2nd Tray) Used to set the record paper size in the 2nd tray. 0
0
6 Reserved 0
7 Reserved 0
8 Index print Used to set whether marking is made to the lead edge of
paper or not to identify the job when printing the received
data.
1
30 1 Reserved 0
2 Reserved 0
3 Reserved 0
4 Reserved 0
5 Reserved 0
6 Reserved 0
7 Reserved 0
8 Reserved 0
1 : TONE 0 : PULSE
1 : ON 0 : OFF
1 : ON 0 : OFF
1 : ON 0 : OFF
Bit No. Letter Legal A4 Other
10011
20101
Bit No. Letter Legal A4 Other
40011
50101
1 : ON 0 : OFF
AR-F152
9 – 28
To Next Page
Loading...
