Main Sub
Item Content
Adjustment
code code range
22 04 Display total
JAM counter.
(a) Operation/display
[?]: If the JAM counter is being displayed, the JAM map screen appears.
If the JAM map counter is being displayed, the JAM counter screen
appears.
[ā]: Displays the next JAM map screen.
[PAUSE]: The execution of the simulation is stopped and the screen returns to the
sub code input screen.
[CA]: The execution of the simulation is stopped and the simulation is terminated.
05 Displays total
counter.
SIMULATION NO.22- 5
TOTAL COUNTER DISPLAY
TOTAL: XXX,XXX
[PAUSE]KEY: END DISPLAY
[Content] The current total counter value is displayed.
(a) Operation/display
[PAUSE]: The execution of the simulation is stopped and the screen returns to the
sub code input screen.
[CA]: The execution of the simulation is stopped and the simulation is terminated.
06 Displays
developer
counter.
SIMULATION NO.22- 6
DEVELOPER COUNTER DISPLAY
DEVELOPER: XXX,XXX
[PAUSE]KEY: END DISPLAY
[Content] The current developer counter value is displayed.
(a) Operation/display
[PAUSE]: The execution of the simulation is stopped and the screen returns to the
sub code input screen.
[CA]: The execution of the simulation is stopped and the simulation is terminated.
07 Displays
developer
preset counter.
SIMULATION NO.22- 7
DEVELOPER PRESET COUNTER DISPLAY
DEVELOPER PRESET: XXX,XXX
[PAUSE]KEY: END DISPLAY
[Content] The developer preset counter value is displayed.
(a) Operation/display
[PAUSE]: The execution of the simulation is stopped and the screen returns to the
sub code input screen.
[CA]: The execution of the simulation is stopped and the simulation is terminated.
9 ā 34
To Next Page
Loading...
