Main Sub
Item Content
Adjustment
code code range
24 01 Clears JAM
counter/JAM
map.
SIMULATION NO.24- 1
TOTAL JAM / JAM MEMORY
WOULD YOU MIND IF CLEARING EXECUTE?
1. EXECUTE 2. CANCEL
SELECT WITH TEN KEY
• [1] key
SIMULATION NO.24- 1
TOTAL JAM / JAM MEMORY
COMPLETED CLEARING
TOTAL MISFEED COUNTER DISPLAY
TOTAL JAM: 000,000
[PAUSE]KEY: END DISPLAY
[Content] The JAM counter and JAM map are cleared. After that, the JAM counter is dis-
played.
(a) Operation/display
[1]: The simulation is executed and the screen changes to the JAM counter
screen.
[2]: The simulation is stopped and the screen returns to the sub code input
screen.
If any key other than [1] or [2] is pressed, the error buzzer sounds.
[PAUSE]: The execution of the simulation is stopped and the screen returns to the
sub code input screen.
[CA]: The execution of the simulation is stopped and the simulation is terminated.
02 Clears trouble
counter.
SIMULATION NO.24- 2
TROUBLE MEMORY AND COUNTER
WOULD YOU MIND IF CLEARING EXECUTE?
1. EXECUTE 2. CANCEL
SELECT WITH TEN KEY
• [1] key:
SIMULATION NO.24- 2
TROUBLE MEMORY AND COUNTER
COMPLETED CLEARING
TROUBLE COUNTER DISPLAY
TROUBLE COUNTER: 000,000
[PAUSE]KEY: END DISPLAY
9 – 39
To Next Page
Loading...
