122
ROUTINE MAINTENANCE
CLEANING THE DOCUMENT GLASS AND
RSPF/DOCUMENT COVER
If the document glass, underside of the document cover/RSPF, or the scanner for originals coming from the RSPF
(the long narrow glass surface on the left side of the document glass) become dirty, the dirt may appear on copies.
Always keep these parts clean.
Stains or dirt on the document glass/RSPF will also be copied. Wipe the document glass, underside of the document
cover/RSPF and the scanning window on the document glass with a soft, clean cloth.
If necessary, dampen the cloth with water. Do not use thinner, benzene, or similar volatile cleaning agents.
CLEANING THE ORIGINAL SCANNING GLASS (ONLY
WHEN AN RSPF IS INSTALLED)
If white or black lines appear in copies made with using the RSPF, use the
provided glass cleaner to clean the original scanning glass.
1
Open the RSPF and take out the glass
cleaner. (p.31)
2
Clean the original scanning glass with
the glass cleaner.
3
Return the glass cleaner to its original
position.
Do not spray flammable cleaner gas. Gas from the spray may come in contact with the internal
electrical components or high-temperature parts of the fusing unit, creating a risk of fire or
electrical shock.
To Next Page
Loading...
