Sharp AR-M201

CONVENIENT COPY FUNCTIONS
35
4
3
Press the [ ] key ( ) to move " " to
the "ON" position and then press the
[ENTER] key.
4
Press the [ ] key ( ) or [ ] key ( ) to
select the margin position and then press
the [ENTER] key.
Select "LONG EDGE" or "SHORT EDGE".
For the margin position, see the previous page.
5
Select the number of copies and any other settings, and then
press the [START] key ( ).
The copy is delivered to the paper output tray.
• To cancel margin shift copying, press the [CLEAR] key ( ).
• To cancel margin shift mode, press the [CLEAR ALL] key ( ).
MARGIN SHIFT
ON OFF
MARGIN SHIFT
LONG EDGE
Note
!AR-M201.book 35 ページ ２００８年５月２２日 木曜日 午後１時４１分