OPTIONAL EQUIPMENT
81
9
Using the AR-D33 with the printer function
To use the AR-D33 with the printer function, follow these steps to adjust the settings
in the printer driver.
1
Click the "start" button.
2
Click "Control Panel", select "Printer and Other Hardware", and
then click "Printer and Faxes".
ā¢ In Windows Vista, click "Control Panel", and then click "Printer".
ā¢ In Windows 98/Me/2000, select "Setting" and click "Printers".
3
Click the "SHARP AR-XXXX" printer driver icon and from the
"File" menu select "Properties".
ā¢ In Windows Vista, from the "Organize" menu select "Properties".
ā¢ In Windows 98/Me, click the "SHARP AR-XXXX" printer driver icon, select
"Properties" from the "File" menu, and then click the "Setup" tab.
4
Click the "Configuration" tab.
5
Select "Two trays" for "Input tray
option", and click "OK".
The printer driver closes. This completes
the settings needed to use the AR-D33.
Interface cable
Please purchase the appropriate cable for your computer.
USB interface cable
USB cable that supports USB 2.0.
The printer driver cannot be set for use with the AR-D33 when opened
from the application.
Note
!AR-M201.book 81 ćć¼ćø ļ¼ļ¼ļ¼ļ¼å¹“ļ¼ęļ¼ļ¼ę„ćęØęę„ćåå¾ļ¼ęļ¼ļ¼å
To Next Page
Loading...
