Sharp AR-M201

USER SETTINGS
57
7
19 AE LEVEL ADJUST
1: SPF/RSPF
(Adjustment to
5 levels is
possible.)
2: DOCUMENT
GLASS
(Adjustment to
5 levels is
possible.)
• This is used to adjust the
exposure level.
• The automatic exposure level can
be adjusted separately for the
document glass and the RSPF.
• For the procedure for adjusting
the exposure and guidelines
for numeric values, see page
24. The factory default setting
for the exposure level is centre.
20 LANGUAGE
1: AMERICAN
ENGLISH
2: ENGLISH
3: FRENCH
4: SPANISH
• This is used to set the
language used in the display.
21 RESET FACTORY
1: YES
2: NO
• This is used to return all settings
to the factory default settings.
22
SORT AUTO
SELECT
1: ON
2: OFF
• Use this setting to enable or
disable sort auto select mode.
24
• CHECK OC
OPEN
• CHECK RSPF
OPEN (When an
RSPF is
installed.)
1: ON
2: OFF
• You can set the operation that
takes place if the [START] key
( ) is pressed when the
original cover/RSPF is not
completely closed. (For
details on the "Check original
cover/RSPF open function",
see page 14.)
25
VALID COPY
WIDTH
1: A4 (8.5x11)
2: B5R (5.5x8.5)
• Set the allowed paper sizes
for copying from the bypass
tray. When "B5R (5.5x8.5)" is
selected, a copy of an A4
(letter) size original will only
be printed up to B5R (invoice)
size.
28 LSU SETTING
1: ON
2: OFF
• Select whether copying is only
allowed when the polygon
motor is rotating, or also when
the polygon motor is stopped.
29 PAPER TYPE
1: PLAIN PAPER
2: HEAVY PAPER
• Set the temperature of the
fusing unit when the bypass
tray is used.
30
DISPLAY
CONTRAST
1: LIGHTER
2: LIGHT
3: NORMAL
4: DARK
5: DARKER
• Set the contrast of the display.
Program
number
Program name
Setting codes
(factory default
setting appears
in bold)
Explanation
!AR-M201.book 57 ページ ２００８年５月２２日 木曜日 午後１時４１分