Sharp AR-M201 - Page 82

AR-203E/5420/M200/M201 SIMULATION, TROUBLE CODES 10 - 9
22 01 Maintenance counter display [Function]
When [OK]/[ENTER]/[START] key is pressed, the maintenance counter is displayed.
[Operation]
02 Maintenance preset display [Function]
When [OK]/[ENTER]/[START] key is pressed, the preset value (25,000 sheets, etc.) corre-
sponding to the code set with simulation 21-01 is displayed.
[Operation]
04 JAM total counter display [Function]
The JAM total counter is displayed.
[Operation]
05 Total counter display [Function]
The total counter value is displayed.
[Operation]
06 Developer counter display [Function]
When [OK]/[ENTER]/[START] key is pressed, the developer counter value is obtained and dis-
played.
[Operation]
08 SPF/RSPF counter display
(Only the AR-203E/M200/
M201 with the SPF/RSPF
installed)
[Function]
The SPF/RSPF counter is displayed.
[Operation]
11 FAX-related counter display
(Executable only when the
FAX is installed.)
[Function]
The FAX-related counter is displayed.
[Operation]
Main
code
Sub
code
Contents Details of function/operation
AR-M200/M201
1) Initial display
AR-203E/5420
The operation is similar to simulation 20-01.
22-01 M-CNT
***,***
AR-M200/M201
1) Initial display
AR-203E/5420
The operation is similar to simulation 20-01.
22-02 M-CNT PRESET
***,***
AR-M200/M201
1) Initial display
AR-203E/5420
The operation is similar to simulation 20-01.
22-04 JAM TTL CNT
***,***
AR-M200/M201
1) Initial display
AR-203E/5420
The operation is similar to simulation 20-01.
22-05 TTL CNT
***,***
AR-M200/M201
1) Initial display
AR-203E/5420
The operation is similar to simulation 20-01.
22-06 DVLP CNT
***,***
AR-M200/M201
1) Initial display
AR-203E
The operation is similar to simulation 20-01.
22-08 SPF CNT
***,***
1) Initial display
∗ [Clear] key: FAX control is terminated.
2) Select 1
("xxx,xxx" is the current value.)
∗ [Clear] key: Returns to "1) Initial display".
2) Select 2
("xxxxx: xx. xx" is the current value.)
∗ [Clear] key: Returns to "1) Initial display".
SELECT COUNTER
1:PAGE 2:TIME
SEND PAGE:xxx,xxx
RECV PAGE:xxx,xxx
TX TIME:xxxxx:xx.xx
RX TIME:xxxxx:xx.xx