Sharp AY-X36RU - Function and Control; Remote Control Introduction; Buttons on the Remote Control

6
AY-X36RU
AE-X36RU
FUNCTION AND CONTROL
[1] Remote Control Introduction
Buttons on the Remote Control
2
4
7
9
11
12
1 ON/OFF Button
2 MODE Button
3 FAN Button
4 SWING Button
5 TURBO FAN Button
6
/ Button
7 SLEEP Button
8 TEMP Button
9 COMFORT Button
10 DISPLAY Button
11 CLOCK Button
12 TIMER ON/TIMER OFF Button
1
3
5
6
8
10
MODE FAN
TURBO
TEMP
DISPLAY
COMFORT
TIMER
ON
TIMER
OFF
ON/OFF
SWING
SLEEP
CLOCK
Note:
● Once popower is connected, the air conditioner will give out a sound. Operation indictor “ “ is ON (red indicator). After that, the
air conditioner can be operated by using the remote controller.
● Under ON status, pressing the button on the remote controller, the signal icon “ “on the display of remote controller will blink
once and the air conditioner will give out a “de” sound, which means the signal has been sent to the air conditioner.
● Under OFF status, set temperature and clock icon will be displayed on the display of remote controller (If timer on, timer off and
light functions are set, the corresponding icons will be displayed on the display of remote controller at the same time); Under ON
status, the display will show the corresponding set function icons.
1. ON/OFF button
Press this button can turn on or turn off the air conditioner. After turning on the air conditioner, operation indicator " "on indoor
unit’s display is ON (green indicator), and indoor unit will give out a sound.
2. MODE button
Press this button to select your required operation mode.
● When selecting auto mode, air conditioner will operate automatically according to ex-factory setting. Set temperature can’t be
adjusted and will not be displayed as well. Press "FAN" button can adjust fan speed. Press "SWING" button can adjust fan
blowing angle.
● After selecting cool mode, air conditioner will operate under cool mode. Cool indicator " "on indoor unit is ON. Press "▲" or "
▲" button to adjust set temperature. Press "FAN" button to adjust fan speed. Press "SWING" button to adjust fan blowing angle.
● When selecting dry mode, the air conditioner operates at low speed under dry mode. Dry indicator " " on indoor unit is ON.
Under dry mode, fan speed can’t be adjusted. Press "SWING" button to adjust fan blowing angle.
● When selecting fan mode, the air conditioner will only blow fan, no cooling and no heating. All indicators are OFF. Press "FAN"
button to adjust fan speed. Press "SWING" button to adjust fan blowing angle.