Sharp AY-XP24LR - Basic Operation

GB-6
1
Press the COOL, DRY or HEAT button .
: COOL
: DRY
: HEAT
• The red OPERATION lamp ( ) will light up.
TO TURN OFF
Press the STOP button.
• The red OPERATION lamp ( ) will turn off.
2
Press the THERMOSTAT button to set
the desired temperature.
(COOL/HEAT mode)
The temperature setting range:18-32 °C.
(DRY mode)
The temperature can be changed up to ±2 °C the
automatically set of temperature.
(Example: 1 °C higher)
(Example: 2 °C lower)
3
Press the FAN button to set the desired
fan speed.
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
1
2
3
BASIC OPERATION
AUTO SOFT LOW HIGH
TURN OFF
AY-XPC18LR_OM_ENG.indd 6AY-XPC18LR_OM_ENG.indd 6 2010-03-18 16:45:452010-03-18 16:45:45