EasyManua.ls Logo

Sharp AY-XP9RMR - Timer Operation; Setting Timer Off; Setting Timer On

Sharp AY-XP9RMR
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB-10
TIMER OFF
1
Press the TIMER OFF button.
” will blink on the remote control.
will disappear and previous setting time
will display on the remote control .
2
Press the or button to set the
desired time.
Every press of or button changes
the time setting by 1 minute. Holding down
or button rapidly changes the time
setting by 1 minute and then 10 minutes.
3
Press the TIMER OFF button.
• The orange TIMER lamp ( ) will light up.
” will be displayed on the remote control.
and current time will display on the
remote control.
TO CANCEL
Press the TIMER OFF button again.
• The orange TIMER lamp ( ) will turn off.
” will disappear on the remote control.
TIMER ON
1
Press the TIMER ON button.
” will blink on the remote control.
will disappear and previous setting time
will display on the remote control.
2
Press the or button to set the
desired time.
Every press of or button changes
the time setting by 1 minute. Holding down
or button rapidly changes the time
setting by 1 minute and then 10 minutes.
3
Press the TIMER ON button.
• The orange TIMER lamp ( ) will light up.
” will be displayed on the remote control.
and current time will display on the
remote control.
TO CANCEL
Press the TIMER ON button again.
• The orange TIMER lamp ( ) will turn off.
• “
” will disappear on the remote control.
TO COMBINE TIMER ON AND TIMER OFF
The TIMER ON and TIMER OFF can be used in
combination.
NOTE:
You cannot program the TIMER ON and TIMER
OFF to operate the unit at different tempera-
tures or other settings.
• Either timer can be programmed to activate prior
to the other.
1
3
1
3
2
2
Before setting the timer, make sure the clock is properly set with the current time.
TIMER OPERATION
NOTE:
If the remote control buttons are not pressed
for 5 seconds while the “OFF” or “ON” is blink-
ing, the “OFF” or “ON” will disappear and any
changes made will not be saved.
• Once you set “TIMER OFF” and/or “TIMER ON”,
the timer setting will become daily settings un-
less you cancel the timer.
01_AYXP9_12RMR_OM_EN.indd 10 14/08/29 16:48

Table of Contents

Related product manuals