Sharp AY-XP9RMR - Airflow Direction Adjustment; Vertical Airflow Control; Horizontal Airflow Control; Turbo Fan Operation

GB-6
ADJUSTING THE AIR FLOW DIRECTION
TURBO FAN OPERATION
VERTICAL AIR FLOW DIRECTION
1
Press the SWING button to select the
vertical air ow direction.
: The vertical airow louver will swing.
: The vertical airow louver
will stop at selected position.
To stop the desired position, press the
SWING button during the louver swinging.
• “ ” will disappear on the remote control.
NOTE:
• In the COOL or DRY mode, the adjustment
range is narrower the swing range in order to
prevent condensation from dripping.
CAUTION:
Never attempt to adjust the vertical airow louver
manually.
• Manual adjustment of the vertical airow louver
can cause the unit to malfunction.
• When the vertical adjustment louver is posi-
tioned at the lowest position in the COOL or
DRY mode for an extended period of time, this
may result in condensation.
HORIZONTAL AIR FLOW DIRECTION
Adjust the horizontal air ow direction using
the louver lever.
OFF
The unit runs at extra high fan speed to reach
the desired room temperature faster.
1
In the COOL or HEAT mode, press the
TURBO FAN button.
• “ ” will be displayed on the remote control.
• The red TURBO FAN lamp (
) will light up.
TO CANCEL
Press the TURBO FAN button again.
• “ ” will disappear on the remote control.
• The red TURBO FAN lamp (
) will turn
off.
NOTE:
• When the unit is turned off, the use of the TUR-
BO FAN operation will be memorized, and it will
be activated the next time you turn on the unit.
• TURBO FAN operation is not available in AUTO,
DRY or FAN mode.
1
1
louver lever
01_AYXP9_12RMR_OM_EN.indd 6 14/08/29 16:48