Sharp AY-XP9RMR - Basic Operation Guide; Starting and Stopping Operation; Mode and Fan Speed Selection

GB-5
ENGLISH
1
Press the ON/OFF button to start operation.
• “ ” will be displayed on the remote control.
• The green OPERATION lamp (
) will light up.
TO TURN OFF
Press the ON/OFF button again.
• “ ” will disappear on the remote control.
• The green OPERATION lamp (
) will turn off.
2
Press the MODE button to select the
operation mode.
3
Press or button to set the desired
temperature.
(AUTO mode)
The temperature indicator will not display and the
temperature can not be adjusted.
(COOL/DRY/HEAT mode)
The temperature setting range: 16-30 °C.
(FAN mode)
The temperature will not change regardless of the
temperature indicator on the remote control.
4
Press the FAN button to set the desired fan
speed.
In the DRY mode, the fan speed is preset to
"SOFT (
)" and cannot be changed.
NOTE:
AUTO MODE
In the AUTO mode, the temperature settings and
modes are automatically selected according to the
room temperature.
BASIC OPERATION
1
2
3
4
AUTO COOL DRY FAN HEAT
SOFT LOW HIGH
01_AYXP9_12RMR_OM_EN.indd 5 14/08/29 16:48