Sharp BD-HP20U - Audio Connections; Connecting 5.1 Ch Speakers through an Amplifi er; After Connecting

Connecting 5.1 ch Speakers through an Amplifi er
You can connect up to 5 speakers and a subwoofer to the 5.1CH AUDIO OUT jacks using an amplifi er.
STEPS
1: Be sure to turn off this Player and the equipment before making any connections.
2: Firmly connect the audio cables to the 5.1CH AUDIO OUT jacks.
To SUBWOOFER jack
To SURROUND
L/R jack
This Player
After connecting
• Set the size, distance and level of each speaker. (Pages 37-39)
• Load a disc and start playback. (Pages 24-27)
NOTE
• You can also connect 2 ch stereo speakers through an amplifi er.
In this case, set the jacks without any speakers connected to
“NONE”. (Pages 37-39)
To CENTER jack
To FRONT L/R jack
Audio cables
(commercially available)
Amplifi er
17
Connection
o
Audio Connections
BD-HP20U_en_c.indd 17BD-HP20U_en_c.indd 17 2007/10/03 13:01:172007/10/03 13:01:17