22
(Continued)
To recall stations that have been stored in
memory (PTY search)
You can search for desired stations by specifying the pro-
gramme type (news, sports, traffic programme, etc. ... see
page 19) from among the stations that have been stored in
memory. (ASPM is convenient for storing stations in mem-
ory.)
1
Press the ON/STAND-BY button to turn the power
on.
2
Press the TUNER (BAND) button.
3
Press the TUNER (BAND) button to select the FM ST
or FM band.
4
Press the PTY.TI SEARCH button.
"PTY TI" and "SELECT" will appear alternately for about
6 seconds.
5
Within 6 seconds, press the PRESET ( or ) but-
ton to select the programme type you want.
Each time the button is pressed, the programme type will
appear. If the button is held down for more than 0.5 sec-
onds, the programme type will appear continuously.
6
Whilst the selected programme type is flashing
(within 4 seconds), press the PTY.TI SEARCH button
again.
After the name of the selected programme type has been
lit for 2 seconds, "SEARCH" will appear, and the search
operation will start.
Note:
If the programme type has changed from flashing to steadily
lit and the PTY.TI SEARCH button is pressed, nothing will
happen. In this case, start again from step 4.
Each time a station of the programme type you want is
encountered, you will be able to listen to the broadcast.
The channel number will flash for about 3 seconds. The sta-
tion name will flash for 7 seconds, and then remain lit.
If you want to listen to another station of that programme
type, press the PTY.TI SEARCH button whilst the chan-
nel number or station name is flashing. The unit will look
for the next station of that type.
Note:
If no station of the programme type you want can be
found, "NOT FOUND" will appear for 4 seconds.
If you have selected the traffic programme:
If you select traffic programme (TP) as the programme type
in step 5 to receive only radio stations which broadcast traf-
fic programmes, "TP" will appear. (However, this does not
necessarily mean that you will hear any traffic announce-
ments at that time.) During a traffic announcement, "TA" will
appear. (Both "TP" and "TA" will appear during an
announcement.)
(Main unit operation)
4,6
2,3
1
5
To Next Page
Loading...
