Sharp CD-E200H - Timer and Sleep Operation

03/2/10 CD-E200H(H)E3.fm
E-25
ENGLISH
CD-E200H
Advanced Features
Timer and sleep operation
Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at
the preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
Sleep operation:
The radio, compact disc and cassette tape can all be turned off
automatically.
! Timer playback or timer recording
Before setting timer:
1 Press the CLOCK button to check that the clock is set to the
correct time. (Refer to page 10.)
2 For timer playback: Load a cassette or discs to be played.
For timer recording: Load a cassette for recording in the TAPE
2 cassette compartment.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD, TUNER (BAND) or TAPE (1 2) button to se-
lect the desired function.
To select the timer playback source: CD, TUNER (BAND) or
TAPE.
To select the timer recording source: TUNER (BAND).
When you select the TUNER (BAND), tune into the desired
station.
3
Adjust the volume using the VOLUME buttons.
Do not turn the volume up too high.
4
Press the TIMER/SLEEP button repeatedly to select timer
playback or timer recording and within 8 seconds, press
the MEMORY/SET button.
Display the white " " for timer playback and the red " " for
timer recording.
White Red