To Next PageTo Next PageWhy is my Sharp CD SW340 remote control not working?
If the Sharp Stereo System's remote control isn't working, check the following: * Ensure the AC power cord of the unit is plugged in. * Verify the batteries are inserted with the correct polarity. * Replace the batteries if they are dead. * Make sure you are within the correct distance and angle. * Check if strong light is interfering with the remote control sensor.
What to do if Sharp Stereo System sound is skipping?
If you are experiencing sound skipping, a lack of treble, or sound fluctuation with your Sharp Stereo System, consider the following: * Check for any slack in the tape. * See if the tape is stretched. * Examine the capstans, pinch rollers, or heads for dirt.
Why Sharp Stereo System cannot record with proper sound quality?
If you cannot record tracks with proper sound quality or cannot erase completely on your Sharp Stereo System, check if you are using a normal tape. Note that you cannot record on a metal or CrO tape.
What to do if I cannot remove the tape from my Sharp CD SW340 Stereo System?
If you cannot remove the tape from your Sharp Stereo System, it may be because a power failure occurred during playback, leaving the heads engaged with the tape. Do not open the compartment with great force.
General| CD Player | Yes |
|---|---|
| Radio Tuner | Yes |
| Bluetooth | No |
| USB Port | No |
| Playable Media | CD, CD-R, CD-RW |
| Cassette Deck | Yes |
| Tuner Bands | FM |
| Speakers | 2-way speakers |
| Type | Mini Component System |
Instructions for manual and auto tuning of AM and FM stations.
Setting timers for automatic playback or recording of audio sources.
