04/1/28 CD-SW440N_09 EN
E-7
General control
Press the ON/STAND-BY button to turn the power on.
To dim the display brightness, hold down the CLEAR/
DIMMER button on the remote control for 2 seconds or
more.
If you turn off and on the main unit with the volume set to
27 or higher, the volume starts at 16 and fades in to the last
set level.
The subwoofer and front speaker will light up according to
the level of the music source played back. To turn on/off the
light, hold down the CLEAR/DIMMER button on the
remote control for 2 seconds or more.
Turn the volume knob towards VOL +/– (on main unit) or
press VOLUME +/– (on remote control) to increase or
decrease the volume.
When the power is first turned on, the unit will enter the
extra bass mode which emphasises the bass frequencies,
and “X-BASS” will appear. To cancel the extra bass mode,
press the X-BASS button on the remote control.
1
Press the BASS/TREBLE button to select “BASS”.
2
Within 5 seconds, press the VOLUME (+ or –) button to
adjust the bass.
1
Press the BASS/TREBLE button to select “TREBLE”.
2
Within 5 seconds, press the VOLUME (+ or –) button to
adjust the treble.
When the EQUALIZER MODE button is pressed, the
current mode setting will be displayed. To change to a
different mode, press the EQUALIZER MODE button
repeatedly until the desired sound mode appears.
When you press any of these buttons during stand-by
mode, the unit turns on.
●
/ button on the main unit : The unit turns on and
playback of the last function will start (iPod, CD,
TUNER, USB, TAPE, AUDIO IN).
●
iPod button on the remote control : The unit turns on
and iPod function is activated.
●
CD button on the remote control : The unit turns on and
CD function is activated.
●
TUNER button on the remote control : The unit turns on
and TUNER function is activated.
●
USB button on the remote control : The unit turns on
and USB function is activated.
●
TAPE button on the remote control: The unit turns on
and TAPE function is activated.
●
AUDIO IN button on the remote control : The unit turns
on and AUDIO IN function is activated.
In the stop mode of disc, USB or tape operation, the main
unit enters the stand-by mode after 15 minutes of inactivity.
After use:
Press the ON/STAND-BY button to enter the power
stand-by mode.
CD
USB
FUNCTION
VOL
ON/STAND-BY
MINI COMPONENT SY STEM
CD-SW440
ON/STAND-BY
To turn the power on
Display brightness control
Volume auto fade-in
Subwoofer and front speaker light up
control
Volume control
X-Bass control
Bass control
Treble control
Equaliser
POPS
VOCAL
JAZZ
FLAT
GAME
CLASSIC
For rock music.
For pop music.
No equalization.
For classical music.
For jazz.
Vocals are enhanced.
No equalisation.
For game.
For classical music.
For pop music.
Vocals are enhanced.
For jazz.
Auto power on function
Auto power off function
To Next Page
Loading...
Need help?
General
