Sharp CD-SW440NH User Manual

04/1/28 CD-SW440N_09 EN
E-8
9
1
7
6
5
4
3
2
1
Listening to the iPod
Supported iPod models:
● iPod nano (software 1.2 above)
● iPod mini (software 1.2 above)
● iPod (5
th
generation) (software 1.3 above) (Dock
connector equipped Click Wheel model)
● iPod (4
th
generation) (software 3.0.2 above) (Dock
connector equipped Click Wheel model)
● iPod nano (2
nd
generation) (software 1.0.0 above)
● iPod nano (3
rd
generation) (software 1.0.3 above)
● iPod nano (4
th
generation) (software 1.0.3 above)
● iPod classic (software 1.0.3 above)
● iPod touch (software 1.1 above)
● iPod touch (2
nd
generation) (software 2.1 above)
Caution:
Please update your iPod unit to the latest software version
from Apple’s homepage before using it.
Choose the iPod adaptor that fits your iPod. Your iPod will
fit snuggly into the correct adaptor. If your iPod is not
mentioned below, an iPod adaptor may have been
included with your iPod unit.
Notes:
● iPod nano 2G, iPod nano 3G, iPod classic and iPod
touch are not compatible with the iPod adaptors listed
above. Please use the adaptor supplied with your iPod
unit.
● iPhone is not supported by this system.
● You can use an audio cable to connect your iPod to the
AUDIO IN socket if:
1.
your iPod adaptor does not fit into the iPod dock on
the main unit.
2.
you have an iPod that does not have an iPod
adaptor.
3.
you have an iPod that does not have an iPod 30 pin
connector.
Notes:
● Once the iPod is connected to the unit it will begin
charging.
● The iPod unit cannot be charged whilst the main unit is
in the stand-by mode or during USB mode.
● Please make sure to set iPod unit to either NTSC or
PAL to match your TV signal. Please visit Apple’s
homepage for further information.
iPod
Adaptor No.
iPod Description Capacity
9 5G iPod (with video) 30GB
9 U2 iPod with video 30GB
9 iPod classic 80GB, 120GB
10 5G iPod with video 60GB & 80GB
10 iPod classic 160GB
A iPod mini 4GB & 6GB
A 4G iPod & U2 iPod 20GB
A iPod photo & colour U2
iPod
20GB & 30GB
A iPod with colour display 20GB
B 4G iPod 40GB
B iPod photo 40GB & 60GB
B iPod with colour display 60GB
iPod adaptor connection
9
The marking shows
which iPod fits
1 Press the ON/STAND-BY button to turn the power on.
2 Insert the iPod adaptor into the iPod dock and connect
your iPod.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the iPod button on the remote control or
FUNCTION button repeatedly on the main unit to
select iPod function.
3 Insert iPod unit in iPod dock of main unit.
4 Press the / button to start playback.
To insert iPod adaptor
iPod
Dock connector
iPod (bottom)
iPod dock
iPod connector
iPod adaptor
iPod playback
CD
USB
TAPE
FUNCTION
FUNCTION
VOL
VOL
ON/STAND-BY
ON/STAND-BY
MINI COMPONENT SY STEM
CD-SW440
ON/STAND-BY
ON/STAND-BY

Sharp CD-SW440NH Specifications

General

Brand	Sharp
Model	CD-SW440NH
Category	Stereo System
Language	English